Finding the Statistics Used to Compile an Execution Plan

In this post, I show you how to determine the statistics objects used by the query optimizer in producing an execution plan.

Note: This technique only applies to queries compiled using the original (70) cardinality estimation model.

Can a SELECT query cause page splits?

The SQL Server documentation has this to say about page splits:

When a new row is added to a full index page, the Database Engine moves approximately half the rows to a new page to make room for the new row. This reorganization is known as a page split. A page split makes room for new records, but can take time to perform and is a resource intensive operation. Also, it can cause fragmentation that causes increased I/O operations.

Given that, how can a SELECT statement be responsible for page splits?

Well, I suppose we could SELECT from a function that adds rows to a table variable as part of its internal implementation, but that would clearly be cheating, and no fun at all from a blogging point of view.

SQL Server, Seeks, and Binary Search

The following table summarizes the results from my last two articles, Enforcing Uniqueness for Performance and Avoiding Uniqueness for Performance. It shows the CPU time used when performing 5 million clustered index seeks into a unique or non-unique index:

In test 1, making the clustered index unique improved performance by around 40%.

In test 2, making the same change reduced performance by around 70% (on 64-bit systems – more on that later).

Avoiding Uniqueness for Performance

In my last post, Enforcing Uniqueness for Performance, I showed how using a unique index could speed up equality seeks by around 40%.

Enforcing Uniqueness for Performance

A little while back, I posted a short series on seeks and scans:

• When is a Seek not a Seek?
• So…is it a Seek or a Scan?
• Seeking Without Indexes

One of the things I highlighted in the middle post was the difference between a singleton seek and a range scan:

• A singleton equality seek always retrieves exactly one row, and is guaranteed to do so because a unique index exists to enforce it.

• A range scan seeks down the B-tree to a starting (or ending) point, and scans forward (or backward) from that point using the next or previous page pointers.

Today’s short post shows how much faster a singleton seek is, compared with a range scan, even when both return exactly the same number of records.

Join Performance, Implicit Conversions, and Residuals

Introduction

You probably already know that it’s important to be aware of data types when writing queries, and that implicit conversions between types can lead to poor query performance.

Some people have gone so far as to write scripts to search the plan cache for CONVERT_IMPLICIT elements, and others routinely inspect plans for that type of thing when tuning.

Now, that’s all good, as far as it goes. It may surprise you to learn that not all implicit conversions are visible in query plans, and there are other important factors to consider too.

Bitmap Magic (or… how SQL Server uses bitmap filters)

Question

Can a parallel query use less CPU than the same serial query, while executing faster?

The answer is yes! To demonstrate, I’ll use the following two (heap) tables, each containing a single column typed as integer:

Undocumented Query Plans: The ANY Aggregate

As usual, here’s a sample table:

CREATE TABLE #Example
(
    pk numeric IDENTITY PRIMARY KEY NONCLUSTERED,
    col1 sql_variant NULL,
    col2 sql_variant NULL,
    thing sql_variant NOT NULL,
);

Some sample data:

And an index that will be useful shortly:

CREATE INDEX nc1 
ON #Example
    (col1, col2, thing);

There’s a complete script to create the table and add the data at the end of this post. There’s nothing special about the table or the data (except that I wanted to have some fun with values and data types).

Undocumented Query Plans: Equality Comparisons

The diagram below shows two data sets, with differences highlighted:

To find changed rows using T-SQL, we might write a query like this:

The logic is clear: Join rows from the two sets together on the primary key column, and return rows where a change has occurred in one or more data columns.

Unfortunately, this query only finds one of the expected four rows:

The problem is that our query does not correctly handle NULLs.

How Parallelism Works in SQL Server

You might have noticed that January was a quiet blogging month for me.

Part of the reason was that I was working on an article for Simple Talk, looking at how parallel query execution really works. The first part is published today at:

Understanding and Using Parallelism in SQL Server.

This introductory piece is not quite as technical as normal, but I hope there be enough interesting material there to make it worth a read.

© Paul White
email: SQLkiwi@gmail.com
twitter: @SQL_Kiwi

SQL Server Bug: Slow T-SQL Sums and Averages

It’s a curious thing about SQL that the SUM or AVG of no items (an empty set) is not zero, it’s NULL.

In this post, you’ll see how this means your SUM and AVG calculations might run at half speed, or worse. As usual though, this entry is not so much about the result, but the journey we take to get there.

Advanced TSQL Tuning: Why Internals Knowledge Matters

There is much more to query tuning than reducing logical reads and adding covering nonclustered indexes. Query tuning is not complete as soon as the query returns results quickly in the development or test environments.

In production, your query will compete for memory, CPU, locks, I/O, and other resources on the server. Today’s post looks at some tuning considerations that are often overlooked, and shows how deep internals knowledge can help you write better T-SQL.

I see no LOBs!

Is it possible to see LOB (large object) logical reads from STATISTICS IO output on a table with no LOB columns?

I was asked this question today by someone who had spent a good fraction of their afternoon trying to work out why this was occurring — even going so far as to re-run DBCC CHECKDB to see if corruption was the cause.

The table in question wasn’t particularly pretty. It had grown somewhat organically over time, with new columns being added every so often as the need arose.

Nevertheless, it remained a simple structure with no LOB columns — no text or image, no xml, no max types — nothing aside from ordinary integer, money, varchar, and datetime types.

To add to the air of mystery, not every query that ran against the table would report LOB logical reads — just sometimes — but when it did, the query often took much longer to execute.

Seeking Without Indexes

A seek can contain one or more seek predicates, each of which can either identify (at most) one row in a unique index (a singleton lookup) or a range of values (a range scan).

When looking at an execution plan, we often need to look at the details of the seek operator in the Properties window to see how many operations it is performing, and what type of operation each one is.

As seen in the first post of this mini-series, When is a Seek not a Seek? the number of hidden seeking operations can have an appreciable impact on performance.

So…is it a Seek or a Scan?

You might be most familiar with the terms ‘Seek’ and ‘Scan’ from the graphical plans produced by SQL Server Management Studio (SSMS). You might look to the SSMS tool-tip descriptions to explain the differences between them:

Both mention scans and ranges (nothing about seeks) and the Index Seek description maybe implies that it will not scan the index entirely (which isn’t necessarily true). Not massively helpful.

When is a Seek not a Seek?

The following script creates a single-column clustered table containing the integers from 1 to 1,000 inclusive.

IF OBJECT_ID(N'tempdb..#Test', N'U') IS NOT NULL
BEGIN
    DROP TABLE #Test
END;
GO
CREATE TABLE #Test
(
    id integer PRIMARY KEY CLUSTERED
);
INSERT #Test
    (id)
SELECT
    V.number
FROM master.dbo.spt_values AS V
WHERE
    V.[type] = N'P'
    AND V.number BETWEEN 1 AND 1000;

Let’s say we are given the following task:

Find the rows with values from 100 to 170, excluding any values that divide exactly by 10.

Beware Sneaky Reads with Unique Indexes

I saw a question asked recently on the #sqlhelp hash tag:

Might SQL Server retrieve (out-of-row) LOB data from a table, even if the column isn’t referenced in the query?

Leaving aside trivial cases like selecting a computed column that does reference the LOB data, one might be tempted to say that no, SQL Server does not read data you haven’t asked for.

In general, that is correct; however, there are cases where SQL Server might sneakily read a LOB column.

Heaps of Trouble?

Brad Schulz recently wrote about optimizing a query run against tables with no indexes at all. The problem was, predictably, that performance was not very good. The catch was that we are not allowed to create any indexes (or even new statistics) as part of our optimization efforts.

In this post, I’m going to look at the problem from a different angle, and present an alternative solution to the one Brad found.

Myth: SQL Server Caches a Serial Plan with every Parallel Plan

Many people believe that whenever SQL Server creates an execution plan that uses parallelism, an alternative serial plan is also cached.

The idea seems to be that the execution engine then decides between the parallel and serial alternatives at runtime. I’ve seen this on forums, in blogs, and even in books.

In fairness, a lot of the official documentation is not as clear as it might be on the subject. In this post I will show that only a single (parallel) plan is cached. I will also show that SQL Server can execute a parallel plan on a single thread.

The Case of the Missing Shared Locks

This post covers a little-known locking optimization that provides a surprising answer to the question:

If I hold an exclusive lock on a row, can another transaction running at the default read committed isolation level read it?

Most people would answer ‘no’, on the basis that the read would block when it tried to acquire a shared lock. Others might respond that it depends on whether the READ_COMMITTED_SNAPSHOT database option was in effect, but let’s assume that is not the case, and we are dealing simply with the default (locking) read committed isolation level.

Sequence Tables

It is frequently useful to generate sequences of values within SQL Server, perhaps for use as surrogate keys. Using the IDENTITY property on a column is the easiest way to automatically generate such sequences:

CREATE TABLE dbo.SomeTable
(
    row_id integer IDENTITY PRIMARY KEY,
    [data] sql_variant NOT NULL,
);

Sometimes though, the database designer needs a more flexible scheme than is provided by the IDENTITY property. One alternative is to use a Sequence Table.

A Tale of Two Index Hints

If you look up Table Hints in the official documentation, you’ll find the following statements:

If a clustered index exists, INDEX(0) forces a clustered index scan and INDEX(1) forces a clustered index scan or seek.

If no clustered index exists, INDEX(0) forces a table scan and INDEX(1) is interpreted as an error.

The interesting thing there is that both hints can result in a scan. If that is the case, you might wonder if there is any effective difference between the two.

This blog entry explores that question, and highlights an optimizer quirk that can result in a much less efficient query plan when using INDEX(0). I’ll also cover some stuff about ordering guarantees.

Inside the Optimizer: Plan Costing

A detailed look at costing, and more undocumented optimizer fun.

The SQL Server query optimizer generates a number of physical plan alternatives from a logical requirement expressed in T-SQL. If full cost-based optimization is required, a cost is assigned to each iterator in each alternative plan, and the plan with the lowest overall cost is ultimately selected for execution.

Sorting, Row Goals, and the TOP 100 Problem

When you write a query to return the first few rows from a potential result set, you’ll often use the TOP clause.

To give a precise meaning to the TOP operation, it will normally be accompanied by an ORDER BY clause. Together, the TOP…ORDER BY construction can be used to precisely identify which top ‘n’ rows should be returned.

Row Goals and Grouping

You might recall from Inside the Optimizer: Row Goals In Depth that query plans containing a row goal tend to favour nested loops or sort-free merge join over hashing.

This is because a hash join has to fully process its build input (to populate its hash table) before it can start probing for matches on its other input. Hash join therefore has a high start-up cost, balanced by a lower per-row cost once probing begins.

In this post, we will take a look at how row goals affect grouping operations.